HOW TO TAKE CARE AFTER USE
I. After use, open the water-in lid (A) to ensure no liquid left in water box (B).
II. Take out the sprayer from ease (D), wash it in fresh water. Wipe up the moisture, then fill the external-use sprayer. (H1) into the case (D) in the right direction...

III. Open the water-in lid (A) press the case (D) and water reservoir (B) at the same time, until case (D) comes into the water reservoir (B) fully. Faster the water in lid (A).
IV. Put the cleanser, internal-use sprayer (H2), and nursing sprayer (H3) into plastic bag, then in handbag (G).

 

 

Note: Do not pour water on the external case (D). Do not use boiling water with this unit at any time. Remove the battery from case (D) when not used from external periods.

HOW TO USE THE NURSING SPRAYER (H3)

I. Install the nursing sprayer (H3) as pictured below.
II. Open water-in lid (A) and add cleansing liquid. Turn the top of this sprayer (H3) to select different spraying mode.
III. Put the loop handle around wrist while holding the appliance, point where you wash and press the button (C).

  
"rotate nozzle to change pattern of spray"

Page 1 2 3 4